It´s possible to equip libraries, museums and archives with a computerized system that allows the recording of the main environmental micro data: Relative Humidity and Temperature.
The system consists of a variable number of measurement stations that detect the physical parameters at predetermined intervals by the head of the Institute.
The data is stored in a memory for each station that can be of 3,700 measurements.
The measurement ranges can be set up from 1 second up to several hours.
Data can be downloaded to a laptop via an interface and then be handled by specialized software.
It is also possible to adopt a convenient system for data collection consisting of a portable memory that lets you download data from 25 measuring stations and then download them to the central computer.
Data from each station may be made in the form of printouts and / or graphic and they may be printed or saved on a multimedia support.
Two channels temperature and humidity logger with internal sensors
Parameter Humidity / Temperature
Sensor humidity sensor / NTC (internal)
No. Of channels 2 channels (internal% RH, ° C)
Range from 0 to 100% RH
Size - 10 ° C to +50 ° C
Resolution 0.1% RH / 0.1 ° C
Precis. / System ± 3% RH
± 1 digit ± 0.5 ° C
Memory 3,700 readings
Operating temperature - 10 ° C to + 50 ° C
Storage Temp - 40 ° C to + 70 ° C
Battery Type Lithium (1 / 2 AA)
Weight 80 g
Memory for Pocket portable data collection
Memory capacity 1MB (500,000 values??)
Data logger reading time about 400 readings per second.
PC Read Time about 1,500 readings per second.
Data logger interface two-way IR transfer
PC interface RS 232 (input sub_D)
Operating temperature - 30 ° C to + 70 ° C
Storage temperature - 40 ° C to + 85 ° C
Key Off / On Off: Auto power off after 1 minute
Battery Type 3x AAA micro cells
Case ABS (Black)
The pocket-sized portable memory for data collection (data collector) transfers the measured values by temperature and humidity recorder (data logger in the field) to the Personal Computer.
Rapid transfer and analysis of data
After programming the data logger and downloading the data, you can analyze and store the values measured using the ComSoft application, compatible with Windows.
COMSOFT Easy to use, performs data analysis.
It has all the functions necessary to monitor, analyze, store and print the measured values.
It allows you to program the data logger and download data, using the available drivers installed in the instrument.
You can also define a values limit for optimal control.
Inserting short titles, text fields or assigning channels names are options also made available
by the software, to ensure a clear and precise location should several data loggers be used.
The measured values, once downloaded, can be viewed as graphs or tables, and then analyzed.
Thanks to the "cross function", it is possible to pinpoint the specific values: this function proceeds
analysis of the curves within the graph, showing number, date, time and reading.